Roofing & Shingle Dumpster Rental in Lexington, TX
Tear-off containers for Lexington roofers, with a nail sweep at pickup.
Roofing & Shingle Dumpster Rental in Lexington
A square of asphalt shingle weighs roughly 250 pounds for single-layer three-tab and can reach 400 or more for architectural or a second layer. That makes Lexington roofing containers weight-bound, not volume-bound.
Lexington is a small community, so the delivery is scheduled rather than improvised. That is usually an advantage: you get the day you asked for.
Deliveries for this service cover Lexington itself plus Rockdale, Giddings and Caldwell. Tell us the address and the access, and the right truck turns up rather than one that cannot make the turn.
Hail season roofing in Lexington
Lexington sits in the part of Texas that takes the worst of the spring hail, and a single storm can put thousands of roofs into the claims pipeline across one metro in an afternoon. Container demand follows within days and stays elevated for weeks.
If you are a roofing contractor working claims around Lexington, book ahead of the crew rather than the morning you need the box. Tell us expected volume and we can hold capacity instead of quoting you against a queue.
Sizing this job in Lexington
A typical Lexington single-family re-roof is 20 to 30 squares, which is a 15 or 20 yard depending on shingle weight and whether there is a second layer underneath.
What the container accepts, what the receiving facility will reject, and the full dimensions and tonnage table are on the Roofing & Shingle Dumpster Rental guide. For Texas-specific rules on permits, disposal rates and ground conditions, see Roofing & Shingle Dumpster Rental in Texas.
Lexington questions
Where will you put the container on a Lexington roof job?
As close to the eave on the tear-off side as access allows, doors facing the work. That is the difference between shovelling straight off a tarp and carrying every bundle.
Do you take tile or slate roofing?
Yes, but not in a standard shingle container. Tile and slate are heavy-debris loads and need a smaller container with a lower fill line.
How many squares fit in a 20 yard?
Roughly 30 squares of single-layer architectural shingle within the weight allowance. A second layer, or a heavier shingle, cuts that significantly.
Do you serve the area around Lexington?
Yes. Alongside Lexington and 78947 we cover Rockdale, Giddings and Caldwell and the rest of Lee County. Give us the ZIP and we will confirm in about a minute.
Other containers in Lexington
Most jobs need more than one. These are the other five services we run across Lexington and Lee County.
Roofing & Shingle Dumpster Rental nearby
Same container, same terms, in the towns next to Lexington.
One call and it is scheduled
A couple of minutes on the phone settles the size, the hold and the price before anything is booked.